Welcome to shenzhen shi tilson auto equipment co.,ltd. FAVARATE |  JOIN US 中文 English 繁体

SERVICE TEL:

0755-86331900

CONTACT
CONTACT US

SHENZHENSHI TILSON AUTO EQUIPMENT CO.,LTD.

support hotline:

86-0755-86331900/86331901

mailbox:tls-1@163.net

Head Office Address:Block A, Tianli Central Square, Houhai Avenue, Nanshan District, Shenzhen

Production base:Buji Town, Longgang District, Shenzhen Sakata third industrial zone 4


Industry news
POSITION:HOME > News > Industry news

From the belt machine wounding 10 cases see belt machine accident often appears where

时间:2016-10-10 所属分类:Industry news浏览:

From the belt machine wounding 10 cases see belt machine accident often appears where:

1, the workers step on the running belt head clean up coal debris, accidentally tread in the joint tube observation window, was cutter injury, the direct cause of the accident: joint barrel observation window without guard.

2, workers in the belt nose inspection belt operation, due to the lack of a joint tube observation window cover, accidentally hand care into the window, resulting in their own disabled.

3, the belt driver illegal operation by hand to remove the floating belt within the drum, the belt and the roller hole caught dragging, twisted its arm.

4, the belt during the belt driver found the tail roller inside the debris, its not stop the belt running will reach out to the drum to clean up debris, will be involved in the drum death. One tail roller non-protective isolation facilities is also an important reason for the accident.

5, the staff lifted the end of the belt cover after treatment of floating coal, neither cover nor leave the end of the machine that is driving the driver after the end of the test drive belt was accidentally involved in the tail roller dead.

6, the belt driver preoccupied, the spirit is not concentrated, in the running belt to check the belt roller is normal in the process of accidentally fell into the cylinder to death. One of the staff of the ideological education is not in place, resulting in staff awareness of security, the negative emotions of life can not work to self-regulation, work of the spirit of lax is the main reason for the accident.

7, the staff after the completion of take-up operations, the need to start the belt test machine, the belt driver reckless recklessly, the operator has not yet evacuated the case did not hit the signal will cause the belt to work accidentally involved in drum death. One belt driver illegal operation, reckless adventure is the main reason for the accident. Operation is not the development of safety technical measures and organizational learning to order strict enforcement is also an important reason for the accident.

8, the staff found the belt roller slippery, got straw to fill in the roller and the belt between the handling slip fault, in the process of packing accidentally involved in drum death. One of the staff in dealing with belt processing is not the main reason for the accident. 9, when the belt in the belt, because the belt can not be caught, so the belt machine to pull, resulting in workers were involved in drum death. Wherein the operator is not evacuated near the belt pulley when the belt is started, which is the main reason for the accident.

10, maintenance workers illegal in the belt running down to the end of the belt conveyor belt inspection belt cleaning device, accidentally involved in the end of the belt, extrusion death. One of the awareness of the safety of workers, risk blind dry, non-stop case into the end of the belt conveyor is the main reason for the accident.